A furnace is a very important piece of equipment in any home. As such, it is important to ensure that it is working well at all times. Part of achieving this goal involves regularly cleaning and maintaining various parts of the equipment in good condition. When the equipment is not cleaned well, it starts to use more gas, oil, or electricity, leading to higher maintenance costs. It also becomes increasingly inefficient. When in need of oil furnace cleaning PA should be visited.
There are various parts of an oil furnace that require cleaning for them to function efficiently. It is vital to clean all components of a furnace, but there are three main parts that if not cleaned, may impair how the equipment functions. These are the blower, the filter system, and heat exchanger. Efficient performance of the furnace will be affected if dirt is left to accumulate on these parts for a long duration.
The lifespan of the equipment is usually dependent on how clean these components are kept. For one to be able to clean the three components properly, one needs some prior knowledge so as to avoid damaging them during cleaning. To clean the filter and blower fan, one should begin by finding the access panel. This component is usually located on the outside of the furnace.
The access panel is fixed between the blower system and the return-air duct in many models. The duct is situated above the panel while the blower system is on the lower side. On the front side of the furnace, there is the filter. One has to remove the panel first before accessing the filter. The filter may also have its own door. However, one should always ensure the power is off before doing any of these activities.
The filter should be removed from the equipment to be cleaned properly. There should not be any problem with the filter sliding out. After pulling it out, it should be thoroughly inspected to check for presence of dirt and damages. The first step is to remove visible loose debris on the surface.
Once all the loose dirt particles have been removed, tap water mixed with mild soap should be used to clean the remaining dirt. After all dirt has been removed, the filter should be rinsed using clean water and allowed to dry adequately. If there is any visible damage to the filter, it should be replaced if it is a disposable model.
The next step is to clean the blower assembly, which will require one to remove the entire front panel. There may be screws that hold the panel in place that need to be unscrewed. In case the panel is held in place by hinges instead of screws, they should be opened. One should slide the fan out of its compartment to be cleaned.
The fan is normally held on the track and at times connected to the rest of the device by a wire. The blower and the fan ought to be cleaned using mild soap and water. As for the fan blades and the spaces in between, one can use a toothbrush to clean them. The heat exchanger can be cleaned in the same manner.
There are various parts of an oil furnace that require cleaning for them to function efficiently. It is vital to clean all components of a furnace, but there are three main parts that if not cleaned, may impair how the equipment functions. These are the blower, the filter system, and heat exchanger. Efficient performance of the furnace will be affected if dirt is left to accumulate on these parts for a long duration.
The lifespan of the equipment is usually dependent on how clean these components are kept. For one to be able to clean the three components properly, one needs some prior knowledge so as to avoid damaging them during cleaning. To clean the filter and blower fan, one should begin by finding the access panel. This component is usually located on the outside of the furnace.
The access panel is fixed between the blower system and the return-air duct in many models. The duct is situated above the panel while the blower system is on the lower side. On the front side of the furnace, there is the filter. One has to remove the panel first before accessing the filter. The filter may also have its own door. However, one should always ensure the power is off before doing any of these activities.
The filter should be removed from the equipment to be cleaned properly. There should not be any problem with the filter sliding out. After pulling it out, it should be thoroughly inspected to check for presence of dirt and damages. The first step is to remove visible loose debris on the surface.
Once all the loose dirt particles have been removed, tap water mixed with mild soap should be used to clean the remaining dirt. After all dirt has been removed, the filter should be rinsed using clean water and allowed to dry adequately. If there is any visible damage to the filter, it should be replaced if it is a disposable model.
The next step is to clean the blower assembly, which will require one to remove the entire front panel. There may be screws that hold the panel in place that need to be unscrewed. In case the panel is held in place by hinges instead of screws, they should be opened. One should slide the fan out of its compartment to be cleaned.
The fan is normally held on the track and at times connected to the rest of the device by a wire. The blower and the fan ought to be cleaned using mild soap and water. As for the fan blades and the spaces in between, one can use a toothbrush to clean them. The heat exchanger can be cleaned in the same manner.
About the Author:
If you are searching for an oil furnace cleaning PA service, you can trust this source. Get all the specifics by clicking on this link http://www.capitolcityoil.com/Furnace-Cleanings.html.